No items found.
No items found.

Kallfass Universa 400 Plastic Wrapping Machine 2008 NL-Lomm

on request
excl btw.
Universa 400 Compact 450S0
Ref nr:

Manufacturer: Kallfass GmbH
Side welding machine Universa 400 with conveyor belt and Kallfass MIDI tunnel
Year of construction: 2008
cross welding punch: 400 mm
Side welding: knife, can be converted to a wheel-knife system.
Foil: half tube foil, approx. 12 - 80µm
Film roll outer diameter: max. 400 mm
Film roll width: max. 600 mm
Min. product length: 80 mm
Min. product width: 80 mm
Control system Simatic S7
Siemens touch panel
passage height: 250 mm
working height: 780 - 930mm
Power supply: 400 Volt three-phase current, 50 Hz with protective conductor
Nominal power: 4 kVA
Rated current: 6.4 A
Machine is still being cleaned and checked.
Current pictures will follow soon.
The machines can be tested with your products and foil at any time.

Fully automatic flow wrapping machines for packaging products - regardless of their length - in full wrap and without film overlap. The product is fed in via a conveyor belt with simultaneous
Wrapping in a half tubular film over a forming shoulder. The product is infeeded via a light barrier. The infeed belt is easily adjustable to different product widths. After wrapping the product with foil
the transverse welding is done with a permanently heated welding system. The longitudinal weld is produced by a continuous side welding device. The height of the forming shoulder and welding devices is manually adjustable.
The remaining residual film strip is taken up on a film take-up.

Spikweien 13, 5943 AC Lomm
The Netherlands
BTW: NL003300744B15
Marc Geerts B.V. - 2020 - All rights reserved
Website door Internetbureau Clience